Gen X Honda Civic Engine Under Tray Skid Plate
9th Gen (2012-2015)
The OEM undercarriage is made entirely of plastic. We have designed a skid plate/under tray to cover up the bottom of the engine to increase protection for your motor. This design is vented for airflow improvement and optimal cooling. By having this on, you will improve airflow both through the radiator and the aerodynamics under the vehicle.
DOES NOT USE THE OEM PLASTIC.
Installation is simple and will use the new provided hardware. Hardware consists of new plastic push clips, bolts and speed nuts. Because HONDA did not use a lot of threaded holes, we are going to be using some self-tapping bolts to secure this to the frame. Optionally, you can use rivets, or nutserts (not included), which are the best option if you have the tool for it.
FITS:
2012-2015 Honda Civic
INSTALL INSTRUCTIONS
- MADE OF .063 ALUMINUM - hard aluminum resistant to denting and splitting but lightweight to avoid adding unnecessary weight
- LASER CUT - Precise cuts to fit stock mounting points * CLEARANCE - Clearance as good as OEM or better, but stronger which improves airflow
- RIGIDITY - Offers better protection while strengthening bumper support for better stability at high speeds
- OIL CHANGE DOORS - Easy Access Door for quick oil changes
- VENTED DESIGN - Helps to aid with air flow and heat removal
- Fits:
- 2012-2015 Honda Civic
1 Review
-
Works for Non Si with a few caveats
Install was great and i love the finish. Installing this on my LX Sedan went well too, then only difference is the 2 holes on the left and right rear and left and right side have nowhere to go, but the rear center lines up, all front locations line up as well. Once I got everything tightened down it had 0 give or flex and i have worries about it coming off outside my handywork with the rivnuts. If you need this for a Non SI model you will be fine.
